Standard Dishwasher Sizes Guide | KitchenAid (2024)

WHAT IS THE STANDARD DISHWASHER SIZE?

The standard dishwasher size is typically24 inches wide, 24 inches deep and 35 inches tall.Cabinet openings in many home kitchens today are builtto fit this standard dishwasher size.Tall tub dishwashers typically have the same external dimensions as standard dishwashers.

KitchenAid offers a wide selection ofstandard-sized dishwashers, including high-end dishwashers,with a range of load capacities and features designed to help you fit the dishes you use the most.

Many retailers list dishwasher dimensions by the cabinet opening needed for installation. For example, a dishwasher that is 23-½ inches wide may be listed as a 24-inch dishwasher because that is the size opening it requires. When shopping for a KitchenAid^®dishwasher, you can find the specific dishwasher dimensions in the product details section. Make sure to check the product dimensions against your available space before purchasing a new dishwasher.

3 STEPS TO MEASURE STANDARD DISHWASHER DIMENSIONS

Once installed, built-in dishwashers must be completely enclosed on all sides including the top. While you will want to choose a dishwasher size that most closely fits your cabinet opening, a unit that is too snug may not slide in all the way. It’s better to have a little extra space that can be covered with additional trim if needed. Follow these standard dishwasher dimensions instructions to get started finding the right size dishwasher for your kitchen.

1. MEASURE STANDARD DISHWASHER WIDTH Opening

• Measure the distance between the cabinets in your rough opening.

• To ensure accuracy, first measure near the top of the opening, and again near the bottom. If there is any difference, always go with the smaller of the two measurements.

2. MEASURE STANDARD DISHWASHER HEIGHT Opening

• Measure the distance between the floor and the lowest point of your countertop.

• Even if the underside of the countertop appears even, take two measurements to account for any minor sloping that could affect clearance. First, measure near the back of the opening and then measure again near the front.

• Most dishwashers have adjustable feet to add a little height where needed and to level the unit.
  Note:Always measure an empty opening rather than trying to estimate this distance with an existing dishwasher in place. If new flooring has ever been placed in your kitchen, it may not have been installed underneath the dishwasher. This means the floor under your dishwasher could be lower than the rest of your kitchen.

3. MEASURE STANDARD DISHWASHER DEPTH Opening

• Measure the distance from the back of the dishwasher opening to the front edge of your cabinets.

• It’s best to measure along the sides of each cabinet to account for any variations between them.

• Keep the dishwasher door clearance in mind when deciding where to install your dishwasher or what size dishwasher to buy. You’ll want the ability to fully open your dishwasher door and slide out the racks while still freely moving around your kitchen as you create and clean. A minimum of 27 inches beyond your cabinets is usually required.
  Note:If you are buying aKitchenAid^®dishwasher with custom panels, the overall depth may vary depending on the panel.

When planning your kitchen, keep features such as protruding handles and dishwasher control placement in mind for your new dishwasher. While these features won’t affect the rough opening requirements, they will change the way you interact with your new appliance.KitchenAid®front control dishwasherskeep settings and cycles within view and flush with the dishwasher door.Fully integrated dishwashers, or top control dishwashers, keep controls hidden away for an extra sleek look.KitchenAid® dishwashers with handlescan add a convenient space to hang towels, but if your dishwasher is installed in a high-traffic area,dishwashers with pocket handleshelp keep the exterior flush with cabinets.

Are Dishwashers All Standard Size?

The vast majority of dishwashers are standard sized and fit typical kitchen cabinet openings.If you’re in the market for a new dishwasher, this is most likely what you need. However, there are smaller and larger dishwasher sizes available for non-standard spaces.

What Are Other Dishwasher Sizes?

Alternatives to standard-sized dishwashers include oversized dishwashers that often feature increased capacity and small dishwashers that will fit a more compact living space. If you are a renter and can’t install an appliance, you may even consider a portable dishwasher you can take with you.

What is Dishwasher Capacity?

Dishwasher capacity is measured by how many place settings the model can hold with most standard-sized dishwashers handling between 10 and 12 place settings. The Association of Home Appliance Manufacturers considers one place setting to include the following:

WHAT IS A THIRD RACK DISHWASHER?

Innovations such asKitchenAid^® dishwashers with a third rackgive you extra rack space up top. Third racks can range from slim spaces for kitchen utensils to ones that fit dishes such as cups or bowls. TheKitchenAid®39 dBA Dishwasher in PrintShield™ Finish with a Third Level Utensil Rackholds silverware, serving utensils and spatulas while an adjustable middle rack adds flexibility to fit tall items.KitchenAid®FreeFlex™ Rack Dishwashersfeature the largest third rack available¹with a deep, angled design that fits 6" glasses, mugs and bowls without compromising space in the rack below. With a capacity of 16 place settings, this line of KitchenAid^®dishwashers lets you clean more so you can create more.

_{1. Among leading brands based on usable volume.}

WHAT DISHWASHER FEATURES CAN OPTIMIZE CAPACITY?

Beyond load-size capacity, shopping by dishwasher features can help you find a model that feels customized to you. If you often use larger or uniquely shaped dishware like tagines, woks, and blender jars, look for interior features that can comfortably accommodate them. Adjustable or specialized features like the ones below increase the kind of loading flexibility the creative cook is looking for.

• Fold Down Rows and Tines: These rows and tines can be adjusted in one of three positions so water can clean inside deep or wide dishes, and can be found onKitchenAid®dishwasher models.

• Adjustable Middle Rack: Fit tall items like a stand mixer bowl with an adjustable middle rack, a feature found in theKitchenAid® 44 dBA Dishwasher in PrintShield™ Finish with FreeFlex™ Third Rack. Lower the rack to place large dishes inside or raise it to make room for platters, pitchers, blender jars and more in the rack below.

FIND YOUR PERFECT DISHWASHER SIZE

To choose the right dishwasher size for you, first determine the dimensions you need to fit your space—from standard dishwasher sizes to compact and oversized models. Then look for a capacity that makes sense for you with features that fit the dishes you use the most. Fearlessly create more and turn cleanup into an afterthought with a dishwasher size that’s perfect for your kitchen—and the dishes you create.

Ready to install? For KitchenAid^® models, find thedishwasher partsanddishwasher accessoriesyou need to get started.Plus, learn more about how to install a dishwasher.

GET MORE WITH A KITCHENAID ACCOUNT

Sign in to unlock special savings